Old 11-03-2008, 06:44 PM   #1
Firearm Enthusiast
 
Airweight38's Avatar
 
Join Date: Jul 2008
Location: Kansas City
Posts: 333
Question More of Dad's old stuff..primed cases...any good?

This time, it's a can of ~200 .38 casings. Yay. I'm guessing these are probably ~30 years old.

I dumped the whole tub into my tumbler and let them clean up for about 3 hours. I started sifting them and discovered...holy cow! These have unused primers!

So any obvious concern is walnut grounds in my flash holes. Given that I am meticulous about making sure these don't look blocked (pen light and paperclip, anyone?), are there any other issues to look out for?

I'm guessing since primers last forever that I'm okay using these. It just makes me sick to think of punching them out if they're perfectly good.

Logic tells me, I could make a dozen minimum loads in them just to see what happens, but I thought I'd pick the brains of the more knowledgeable community before I took matters into my own hands.

Any thoughts?

Thanks,

/Jason
__________________
I'll keep my freedom, guns and money. You can keep the "Change."
Airweight38 is offline   Reply With Quote
Old 11-03-2008, 06:55 PM   #2
Firearm Zealot
 
jimkim's Avatar
 
Join Date: Mar 2008
Location: Near the Little Ocmulgee river in GA
Posts: 5,441
Every now and then I find a box I didn't know I had. I prime a few cases and throw them in my revolver(just the case no bullets) and test them. The older primers didn't have the sealants that the new ones have they could have been contaminated.
__________________
For info purposes only, use it at your own risk. JFKimmons and G&G aren't liable for it's misuse.
jimkim is offline   Reply With Quote
Old 11-03-2008, 07:08 PM   #3
Firearm Zealot
 
gandog56's Avatar
 
Join Date: Oct 2006
Location: Mobile, Alabama
Posts: 18,973
Put a few of the non-loaded cases in a revolver and see if they fire. As long as they haven't been stored in large temperature and humidity extremes they may still be good.
__________________
People think I'm paranoid because I own guns. If I own guns, what do I have to be paranoid about?
gandog56 is offline   Reply With Quote
Old 11-04-2008, 12:32 PM   #4
Learn or else!
 
Join Date: Aug 2008
Location: near Funk, Ohio
Posts: 6,681
Even if you somehow got a bit of walnut hull jammed in a flash hole, you shouldn't have a major problem unless you're using compressed loads. The primer should just blow the hull into the powder mix as it burns. Whether the hull burns or not, the total mass of ejecta wouldn't be outrageously high so you probably wouldn't even know it was there. I would pop a few with no powder to see if they light off, then load the rest with light loads and have some fun.
__________________
Teach

Taxpayers voting for Obama are like chickens voting for Colonel Sanders.
DaTeacha is offline   Reply With Quote
Old 11-04-2008, 02:38 PM   #5
JEFF
 
tracer's Avatar
 
Join Date: Sep 2008
Location: LHC AZ
Posts: 3,159
Blog Entries: 1
ANd remember if it didn't feel right or you didn't see the bullet hit the backstop or target STOP and check the barrel for the bullet. Take a rod to clear the squib, it can save the day.
__________________
"Keep it up, see where it gets you"- Mom
tracer is offline   Reply With Quote
Old 11-04-2008, 09:34 PM   #6
Firearm Enthusiast
 
Airweight38's Avatar
 
Join Date: Jul 2008
Location: Kansas City
Posts: 333
I just fired a few off in the basement. Wow! That's a lot of bang and fire for such an innocuous looking little thing. Way louder than I expected. I'm guessing these still work. And I have a new respect for small pistol primers.
__________________
I'll keep my freedom, guns and money. You can keep the "Change."
Airweight38 is offline   Reply With Quote
Old 11-04-2008, 09:40 PM   #7
Firearm Zealot
 
jimkim's Avatar
 
Join Date: Mar 2008
Location: Near the Little Ocmulgee river in GA
Posts: 5,441
Hahahaha!!! They are loud. Aren't they? They are way louder than a cap pistol.
__________________
For info purposes only, use it at your own risk. JFKimmons and G&G aren't liable for it's misuse.
jimkim is offline   Reply With Quote
Old 11-04-2008, 09:43 PM   #8
Firearm Zealot
 
toolman's Avatar
 
Join Date: Apr 2002
Location: abilene,tx
Posts: 8,091
Blog Entries: 2
The primers are the most dangerous component in the reloading process.
__________________
cosmoline is an aphrodisiac!
toolman is online now   Reply With Quote
Reply

Gun & Game - The Friendliest Gun Forum on the Internet > General > The Powder Keg

Tags
.38, casesany, casings, dad, good, primers, stuffprimed

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 10:20 AM.




Recent Discussions

Connect with us!
Advertisement



"It don't cost nuthin' to be nice." -- Mike West