[192ndkid]

Quote:       Originally Posted by Chromie

something I'm working on, this barrel will not be used though...it was too sunny out to show the grain, but this stock is Maple with some tiger strip....

we want better photos .....please

[Chromie]

here is my latest...
Tiger stripe Maple Finger groove stock (Custom made by Tuck @RFC)
trigger and bolt by Que on RFC
Intensity optics 6.5-20x44 scope
Power customs base
Burris Sig Zee Med rings
GM heavy taper barrel
R/T charging handle
mag release and changing handle knob by Shooter35 @ RFC

[192ndkid]

WoW ....That sure is one sexy rifle...I love the Ruger emblem.

[ZOBO]

Quote:       Originally Posted by 192ndkid

what i did was just to use the dowel a 120 git paper wraped around it.It does take a little wile but it should since you want it to be nice a work right.Mine was taperd so i the wraped some ellectic tape one about three and half inches from the end .were the .920 diameter near the reciever and the just went back to the straight dowel for the .750 near the muzzle.I then put a small piece of cork right at the tip of stock for a pressure point near the muzzle. tell us how you make out

Here's a variation on the dowel.The leverage master 5000!!!!!! An elec sweep with the desired paper.

Good luck!

ZOBO

[ZOBO]

ZOBO

[Chromie]

my most recent build,

S&K stock
Green Mountain 20" fluted barrel
Burris Sig Zee rings
Swift 4-12x40 AO scope
polished bolt and 1.8lb trigger reworked by me...

[ThatFreaknGuy]

alright moneys tight being married and having the first kid, on top of being in the millitary. My fathers wife gave me a 10 22 bone stock, I have a few ideas for shaping the stock to my likeing, as well as finish. Also have decided to stick with stock barrel i received for free from friend NIB (cant say no to free gun parts, also got free synthetic stock used, and free standard wood stock used) and am working the synthetic stock into a under folding style, and a cheap tasco scope for now. budget is tight any suggestions to make this thing pop a lil bit and shoot straight. I am debating wether or not to pressure bed it or free float the barrel as well.

[Lock'dnLoad'd]

Not a good picture, nor a "Fine" weapon like some of your guy's beautiful plinkers. I use this for getting down and dirty with the skunks, 'coons and other varmints around the yard. It has a P-4 scope, BSA laser and a light.

[cb671]

Quote:       Originally Posted by MmMongol

Here's Mine. Started as a stock 10/22, then went with the Houge Overmold stock and now in its current form. -Polished Receiver, Trigger Housing, bolt, and firing pin -TacSol extended mag release -Christie's auto bolt release -Power Custom hammer, sear, springs, and bolt handle -Titanium Edge Extractor -Green Mountain 20" SS barel -Fajen Legacy stock -Self-made overtravel screw

Almost Twin's lol:
Fajen Stock
Green Mountain SS Barrel
8x32x44 BSA Platinum Scope
Next Mod will be a Trigger Job