Like Tree5Likes

Reply
 
Thread Tools
Old 09-14-2004, 02:55 PM   #1
Firearm Aficionado
 
myarmor's Avatar
 
Join Date: Jul 2004
Location: Southwest ,VA
Posts: 1,177
Remington 710: How does it perform?

I have seen these for a while now. I read a little how Remington simplified their 700 action down to 22 pieces.
But I guess the question I have is how do they shoot?
I have a 700, and am not really thinking about buying a 710 but I am curious.
myarmor is offline   Reply With Quote
Old 09-14-2004, 06:34 PM   #2
Firearm Zealot
 
Big Dog's Avatar
 
Join Date: Mar 2002
Location: North Florida - the Gunshine State!
Posts: 15,418
The one I handled awhile back had a stiff, gritty trigger, and I didn't care for the plastic stock.
For a less discerning hunter wanting a less expensive rifle - it's adequate.
Compared to your 700, you'll be disappointed in the 710.
__________________
USAF - 1976 - 1980
USN - 1980 - 1986
FLDOE - 1990 - present
Big Dog is offline   Reply With Quote
Old 09-15-2004, 10:12 AM   #3
Firearm Aficionado
 
Join Date: Mar 2002
Location: Ohio
Posts: 586
I haven't heard anything good about them. Most of the reports I've read from real shooters, as opposed to paid-off gunwriters who never say anything's bad, they don't shoot worth a !!!!. You can buy a Savage 111GXP for less money and get a better rifle at the same time. The Savage comes with scope sling mts etc. The 710 is Remingtons Edsel....POS!
__________________
Dave 375 H&H
dave375hh is offline   Reply With Quote
Old 09-15-2004, 12:06 PM   #4
Firearm Aficionado
 
myarmor's Avatar
 
Join Date: Jul 2004
Location: Southwest ,VA
Posts: 1,177
I don't like the stock either BigDog. Looks cheesy.
And I am with you on the Savage. I really like Savage.
myarmor is offline   Reply With Quote
Old 09-15-2004, 01:50 PM   #5
Retired Moderator
 
BattleRifleG3's Avatar
 
Join Date: Mar 2002
Location: Western PA
Posts: 11,751
I used to own one. I sold it only to put $$$ towards an M1 Garand.

Yes, the bolt is stiff. It's due to the tight lockup. Yes, it requires a small amount of force to cycle. It's supposed to be self lubricating but don't hold back from the gun oil. Whether the stock is good depends on your personal shape. I found it was fine. A few very experienced hunters said it felt incredible. The cheekpiece is good.

The greatest thing about this rifle is that it can take any beating you give it. I didn't try too hard, but neither wood nor fingernail put the slightest wear on the barrel's finish. And the stock is extremeky durable.

The bolt locks into the barrel, making it potentially very accurate. I never did too badly with it, though I didn'y get enough practice to do too well. Always obtained sufficient hunting accuracy. This gun will be more accurate than you if you're standing. I suspect you could drag it through the mud and, while it's no AK, you could probably hose it down and it would be clean as ever. If you like a detachable mag, it has that feature at a good price, and extra mags are easy to find. If you DON'T like a detachable mag, this is not the gun for you, because it cannot be loaded while the mag is inside the rifle.

Here's how I think you should decide:
It's good-
If you need only a scope
If you like a detachable mag
If you want a durable finish all over
If the stock feels ok
If the colors are ok for you

It's not for you-
If you are looking for benchrest accuracy (I've never heard of a larger than 2MOA group, no matter what ammo was used)
If you want to load it from the top
If you want open sites
If the color doesn't agree with you and you don't want to paint it
If you like the shape and feel of a competitively priced gun much better

All that said, I have nothing but good to say about Savage, except that mine in 300 RUM has always had trouble feeding from its fixed mag. I'd stay away from their package guns, though. They use cheapo scopes. Remington 710s, at least mine, use Bushnell.
__________________
Trust is earned, not... GIVEN away. - Worf
BattleRifleG3 is offline   Reply With Quote
Old 09-15-2004, 02:03 PM   #6
Firearm Zealot
 
lefty o's Avatar
 
Join Date: Mar 2002
Location: mn
Posts: 8,348
if you dont take care of your rifles the 710 might be okay for you. now if remington was smart they would bring back the 788 instead of making new junk. the 788 was cheap, durable and accurate- we will never see that happen though because most 788's outshot the 700's.
mauser9 likes this.
lefty o is offline   Reply With Quote
Old 09-16-2004, 11:04 AM   #7
Firearm Aficionado
 
myarmor's Avatar
 
Join Date: Jul 2004
Location: Southwest ,VA
Posts: 1,177
Like I said I personally wasn't looking to buy one, but I was just curious. Thanks for the feedback BattleRifleG3. I haven't seen a 788.
How long has it been scence Remington stoped making the 788?
myarmor is offline   Reply With Quote
Old 09-16-2004, 11:27 AM   #8
Retired Moderator
 
Shaun's Avatar
 
Join Date: Mar 2002
Location: Nashville, TN
Posts: 8,868
I read an article a while back that talked about the 710 tri lug system for the bolt and it said what others have said that it was a rough to function and the triggers were aweful.
__________________
"Homeland Security is the responsibility of an armed citizen" ME
http://webpages.charter.net/s.s.v/
Shaun is offline   Reply With Quote
Old 09-16-2004, 12:13 PM   #9
Firearm Zealot
 
lefty o's Avatar
 
Join Date: Mar 2002
Location: mn
Posts: 8,348
the 788 hasnt been made in about 15 yrs, or more.
lefty o is offline   Reply With Quote
Old 09-17-2004, 03:04 PM   #10
Firearm Enthusiast
 
Join Date: Sep 2004
Posts: 227
788 was a nice shooter BUT! Why would anybody want 9 locking lugs,and then put them in the rear of the bolt.
G Hollingsworth is offline   Reply With Quote
Old 09-17-2004, 07:09 PM   #11
Firearm Enthusiast
 
steel_warrior1's Avatar
 
Join Date: Jul 2004
Location: Oberlin, Kansas (Middle of nowhere.)
Posts: 435
Got a friend who bought one at Wallyworl. Bragged said it was a good rifle, better than my savage. Ha, Bull !!!!. He was out hunting and saw a good size buck but couldnt hit is because his scope moved from side to side about a 1/2 inch! What can i say, the kid is kinda dumb. My savage has never had a problem and I plan on owning it for the rest of my life. Looking for a .223 savage to just have. Cant wait.
__________________
Come Check Out My Pacific Tool Company Website!
[SIGPIC][/SIGPIC]
http://pacificreloaders.awardspace.com/
steel_warrior1 is offline   Reply With Quote
Old 10-25-2004, 11:13 PM   #12
Firearm Enthusiast
 
Join Date: Oct 2004
Posts: 12
Quote:       Originally Posted by steel_warrior1
Got a friend who bought one at Wallyworl. Bragged said it was a good rifle, better than my savage. Ha, Bull !!!!. He was out hunting and saw a good size buck but couldnt hit is because his scope moved from side to side about a 1/2 inch! What can i say, the kid is kinda dumb. My savage has never had a problem and I plan on owning it for the rest of my life. Looking for a .223 savage to just have. Cant wait.
His scope moved from side to side a 1/2 inch? doesn't sound like it was the rifles fault, sounds like someone that doesn't know how to tighten his scope mounts. I have heard alot about the 710, mostly from people that don't own one. I own one and reguardless of the anti-hype I shoot 3/4" shot groups dead center at 100 yards consistantly, standing with the 3-9x scope that came on the rifle. I bought the rifle because it was within my price range and with all of the drawbacks; synthetic stock, simplified triger mech., press fit barrel (which isn't really press fit. It is much like the Anschutz style of production) and the plastic magazine release lever (which, when it fails will be replaced per Remington's policy with a steel one). I have shot about 60 rounds through the rifle and have had absolutely no problems with it. I clean the rifle every time I come off of the range and although the bolt action is stiffer than the 700, I like it. The Bushnell scope (which I will get a QD scope mount for and buy a Super Sniper scope so I can swap out when situation dictates) shoots constant shot groups right where I want them to go.

Unless you own the 710, don't comment. If you own/ed a 710 and are going to compare it to a higher quality Savage or Remington 700, keep in mind that Remington came out with the rifle to give hunters that don't have that much money to spend on a 700 or a Savage a chance to use a quality firearm. Sure, they cut some corners, but they are corners that could be cut without sacrificing performance.
Just my .02 but I am more than happy with the rifle. I know for a fact that with Hornady 130 grain bullets, If I see a deer between 50 and 300 yards, I am going to bag it.
mauser9 likes this.
harlequin is offline   Reply With Quote
Old 10-25-2004, 11:42 PM   #13
Retired Moderator
 
BattleRifleG3's Avatar
 
Join Date: Mar 2002
Location: Western PA
Posts: 11,751
I totally agree on that review. I'd like to pick one up in 300 Win Mag one of these days, when a few ships come in.
__________________
Trust is earned, not... GIVEN away. - Worf
BattleRifleG3 is offline   Reply With Quote
Old 10-26-2004, 10:59 AM   #14
Firearm Aficionado
 
myarmor's Avatar
 
Join Date: Jul 2004
Location: Southwest ,VA
Posts: 1,177
Some good feed back there harlequin.
I didn't know much about them, but I am hearing more as of late.
What caliber is yours in?
I didn't realize they made it in a 300 Win Mag....hummm...interesting...
myarmor is offline   Reply With Quote
Old 10-26-2004, 12:08 PM   #15
Firearm Enthusiast
 
Join Date: Oct 2004
Posts: 12
.270 win. But I want to get a better recoil pad for it. I kind of suffer from recoil flinch and I would like to get the trigger presure dropped a bit and have the trigger pull smoothed out.

Last edited by harlequin; 10-26-2004 at 12:15 PM. Reason: wanted to add more content
harlequin is offline   Reply With Quote
Old 10-26-2004, 12:52 PM   #16
Firearm Enthusiast
 
CV32's Avatar
 
Join Date: Aug 2004
Location: Newfoundland
Posts: 88
I have had a Rem 710 in .30-06 for about three years now. I can vouch for the stiffness of the bolt, but it hasn't prevented my enjoyment of the rifle. It shoots consistently well for me, and the stock stands up well to abuse. I took a bull moose at about 100 yd within a couple of months of buying the rifle, and it put the shot exactly where I wanted it. No serious complaints about the 710 here. For the money, it was worth it.
__________________
Happiness is a warm gun.
- The Beatles
CV32 is offline   Reply With Quote
Old 10-27-2004, 12:11 AM   #17
Firearm Enthusiast
 
Join Date: Oct 2004
Posts: 12
Would having the bolt and reciever lapped solve the problem of the bolt stiffness?
harlequin is offline   Reply With Quote
Old 10-27-2004, 11:00 AM   #18
Firearm Aficionado
 
myarmor's Avatar
 
Join Date: Jul 2004
Location: Southwest ,VA
Posts: 1,177
One of my friends just bought one yesterday. His is in 270 as well. This was the first time I have been able to see and hold one up close. As I can see, Remington has cut some edges but like you said just edges. The action felt kinda funny, I kept wanting to compare it to my 700. But these two rifles are very different.
For the money though, it looks to not be a bad investment. A very rugged gun I guess I should say. For the money I wouldn't mind having one in a 7mm Mag.
Your right about the trigger too.
Not that it's a target gun by anymeans, but have you had a chance to take a few long shots with it harlequin?
myarmor is offline   Reply With Quote
Old 10-27-2004, 11:32 AM   #19
Firearm Enthusiast
 
Join Date: Oct 2004
Posts: 12
I looked at a 700 yesterday and it is alot smoother. It is a better rifle. I would have gone with it but to put a scope on it it would have cost me another $300-400 or more. I think the 710 is a very good compromise.
I don't have land to shoot on and the range I go to is only 100yds long. I would like to get out and shoot at 200 & 300 yards. At 300 yards with a hornady 130 grain bullet the drop is only 5.7 inches zeroed at 200 yards.

Last edited by harlequin; 10-27-2004 at 11:48 AM.
harlequin is offline   Reply With Quote
Old 10-28-2004, 05:26 PM   #20
Firearm Enthusiast
 
Tenable's Avatar
 
Join Date: Oct 2004
Location: Soldotna, Alaska
Posts: 14
I liked my .270 Remington 710 till my brother accidentally discharged it next to my head while I was in his room... made me deaf in my left ear for 2 days.
__________________
"No man shall ever be debarred the use of arms. The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." - Thomas Jefferson
Tenable is offline   Reply With Quote
Reply

Gun & Game - The Friendliest Gun Forum on the Internet > Firearms > Manufacturers > Remington

Tags
710, perform, remington

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 11:35 AM.




Recent Discussions

Connect with us!
Advertisement



"It don't cost nuthin' to be nice." -- Mike West