Remington Model 16

CopperTop · 11-11-2007, 06:27 AM

I Need A Complete In Usable Condition Inner Magazine Tube Assembly For A Remington Model 16 22 Remington Automatic.
Thanks In Advance For Any Help.
All The Best
Sammie
We Will Not Tire
We Will Not Falter
And We Will Not Fail
G. W. B.
09/20/2001

jerry · 11-11-2007, 08:23 AM

Try Numrich gun parts

CopperTop · 11-12-2007, 05:06 AM

Hi Jerry 11/12/2007
Thanks For The Reply. I Have Been Trying Them About Every Two Weeks For Several Years And Have Not Been Successful Yet.
All The Best
Sammie
WE WILL NOT TIRE
WE WILL NOT FALTER
AND WE WILL NOT FAIL
G.W.B.
09/20/2001

jerry · 11-12-2007, 09:26 AM

They just don't have it in stock?

Remington*|*16*|*e-GunParts.com

samuel · 11-12-2007, 09:47 AM

That magazine can be built and replaced by any good gunsmith. sam.

CopperTop · 11-13-2007, 06:23 AM

Hi Jerry 11/13/2007
Thanks For The Reply. Correct! It Is Never In Stock. If It Were A Common Type Of Tube Assembly I Can Make Any Of Them. But The Latch Mech. Is Specific To That Rifle And Nothing Else Will Work.
All The Best
Sammie

We Will Not Tire
We Will Not Falter
And We Will Not Fail
G. W. B.
09/20/2001

Hi Sam 11/13/2007
Thanks For The Reply. I Have No Problem Making The Tube Assembly The Latch Assembly Is The Hitch. It Is Specific To That Rifle Alone.
All The Best
Sammie

We Will Not Tire
We Will Not Falter
And We Will Not Fail
G. W. B.
09/20/2001

jerry · 11-13-2007, 06:40 AM

I feel your pain.
Here is a link from Remington that has a bunch of dealers on it. There are a couple with mod 16 parts. You may have covered this base already, if so, please disregard. We'll keep our eyes open otherwise.

Specialty Parts Dealers

CopperTop · 11-13-2007, 07:14 AM

Hi Jerry 11/13/2007
Thanks For The Reply. I Have Tried Several Of Those Listed But See A Couple Of New Ones. I Will Give Them A Shot. Thanks Again.
All The Best
Sammie

We Will Not Tire
We Will Not Falter
And We Will Not Fail
G. W. B.
09/20/2001

samuel · 11-13-2007, 08:09 AM

H'm,I will give you a # where I have had good luck on some things.They have a web site but I cant find it right now. Dick Williams Gun Shop Inc.-4985 Cole Rd.-Saginaw,Mich,48601 Tel.#-989 777 1240. sam.

CopperTop · 11-14-2007, 06:15 AM

Hi Sam 11/14/2007
Thanks For The Reply And The Lead. I Will Give Them A Try.
All The Best
Sammie

We Will Not Tire
We Will Not Falter
And We Will Not Fail
G. W. B.
09/20/2001

morgy · 01-13-2008, 12:58 PM

Copper Top, are you still looking for mag for model 16? I can either make up the end parts for the latch or I can supply complete mag assy.

CopperTop · 01-14-2008, 08:20 AM

HI 01/14/2008
THANKS FOR THE REPLY. I NEED AN ORIGINAL COMPLETE INNER MAGAZINE TUBE ASSEMBLY IN USABLE CONDITION.
ALL THE BEST
SAMMIE

morgy · 01-14-2008, 09:38 AM

OK, I have an original, shipping would be the only problem not that it cannot be done but might be costly as it will be an oversized package. best thing to do is send me an email at morgan668@gmail.com we can work something out

CopperTop · 03-05-2008, 10:07 AM

THANKS TO ALL THAT REPLIED TO THIS THREAD. A VERY FINE GENTLEMAN FROM CANADA HAS TAKEN CARE OF ME.

ALL THE BEST
SAMMIE

11-11-2007, 06:27 AM	#1
CopperTop Member Join Date: May 2006 Posts: 17	Remington Model 16 I Need A Complete In Usable Condition Inner Magazine Tube Assembly For A Remington Model 16 22 Remington Automatic. Thanks In Advance For Any Help. All The Best Sammie We Will Not Tire We Will Not Falter And We Will Not Fail G. W. B. 09/20/2001 Last edited by CopperTop; 11-12-2007 at 06:10 AM.

11-11-2007, 08:23 AM	#2
jerry Senior Member Join Date: Mar 2002 Posts: 10,870 Images: 9 Blog Entries: 1	Try Numrich gun parts __________________ I'm a down home back woods redneck

11-12-2007, 05:06 AM	#3
CopperTop Member Join Date: May 2006 Posts: 17	Remington M 16 Inner Magazine Tube Assembly Hi Jerry 11/12/2007 Thanks For The Reply. I Have Been Trying Them About Every Two Weeks For Several Years And Have Not Been Successful Yet. All The Best Sammie WE WILL NOT TIRE WE WILL NOT FALTER AND WE WILL NOT FAIL G.W.B. 09/20/2001 Last edited by CopperTop; 11-12-2007 at 05:31 AM. Reason: NOT COMPLETELY FAMILIAR WITH SITE OPERATION

11-12-2007, 09:26 AM	#4
jerry Senior Member Join Date: Mar 2002 Posts: 10,870 Images: 9 Blog Entries: 1	They just don't have it in stock? Remington\|16\|e-GunParts.com __________________ I'm a down home back woods redneck

11-13-2007, 06:23 AM	#6
CopperTop Member Join Date: May 2006 Posts: 17	Remington Model 16 Hi Jerry 11/13/2007 Thanks For The Reply. Correct! It Is Never In Stock. If It Were A Common Type Of Tube Assembly I Can Make Any Of Them. But The Latch Mech. Is Specific To That Rifle And Nothing Else Will Work. All The Best Sammie We Will Not Tire We Will Not Falter And We Will Not Fail G. W. B. 09/20/2001 Hi Sam 11/13/2007 Thanks For The Reply. I Have No Problem Making The Tube Assembly The Latch Assembly Is The Hitch. It Is Specific To That Rifle Alone. All The Best Sammie We Will Not Tire We Will Not Falter And We Will Not Fail G. W. B. 09/20/2001 Last edited by CopperTop; 11-13-2007 at 06:29 AM. Reason: Automerged Doublepost

11-12-2007, 09:47 AM	#5
samuel Senior Member Join Date: Dec 2006 Posts: 5,087	That magazine can be built and replaced by any good gunsmith. sam.

11-13-2007, 06:40 AM	#7
jerry Senior Member Join Date: Mar 2002 Posts: 10,870 Images: 9 Blog Entries: 1	I feel your pain. Here is a link from Remington that has a bunch of dealers on it. There are a couple with mod 16 parts. You may have covered this base already, if so, please disregard. We'll keep our eyes open otherwise. Specialty Parts Dealers

11-13-2007, 07:14 AM	#8
CopperTop Member Join Date: May 2006 Posts: 17	Remington M 16 Hi Jerry 11/13/2007 Thanks For The Reply. I Have Tried Several Of Those Listed But See A Couple Of New Ones. I Will Give Them A Shot. Thanks Again. All The Best Sammie We Will Not Tire We Will Not Falter And We Will Not Fail G. W. B. 09/20/2001

11-13-2007, 08:09 AM	#9
samuel Senior Member Join Date: Dec 2006 Posts: 5,087	H'm,I will give you a # where I have had good luck on some things.They have a web site but I cant find it right now. Dick Williams Gun Shop Inc.-4985 Cole Rd.-Saginaw,Mich,48601 Tel.#-989 777 1240. sam.

11-14-2007, 06:15 AM	#10
CopperTop Member Join Date: May 2006 Posts: 17	Hi Sam 11/14/2007 Thanks For The Reply And The Lead. I Will Give Them A Try. All The Best Sammie We Will Not Tire We Will Not Falter And We Will Not Fail G. W. B. 09/20/2001

01-13-2008, 12:58 PM	#11
morgy Registered User Join Date: Jan 2008 Location: NB Canada Posts: 2	Copper Top, are you still looking for mag for model 16? I can either make up the end parts for the latch or I can supply complete mag assy. Last edited by morgy; 01-13-2008 at 01:08 PM. Reason: Automerged Doublepost

01-14-2008, 08:20 AM	#12
CopperTop Member Join Date: May 2006 Posts: 17	HI 01/14/2008 THANKS FOR THE REPLY. I NEED AN ORIGINAL COMPLETE INNER MAGAZINE TUBE ASSEMBLY IN USABLE CONDITION. ALL THE BEST SAMMIE

01-14-2008, 09:38 AM	#13
morgy Registered User Join Date: Jan 2008 Location: NB Canada Posts: 2	Remington Model 16 inner magazine OK, I have an original, shipping would be the only problem not that it cannot be done but might be costly as it will be an oversized package. best thing to do is send me an email at morgan668@gmail.com we can work something out

03-05-2008, 10:07 AM	#14
CopperTop Member Join Date: May 2006 Posts: 17	THANKS TO ALL THAT REPLIED TO THIS THREAD. A VERY FINE GENTLEMAN FROM CANADA HAS TAKEN CARE OF ME. ALL THE BEST SAMMIE