Pics of My Ruger Super Blackhawk and Red Dot Scope

bltefft · 10-12-2008, 01:52 AM

Pics of My Ruger Super Blackhawk and Red Dot Scope

Here are 4 pics of my .44 Mag Ruger Super Blackhawk and new Millett Red Dot Scope

Here's a shot of the whole rig

A little closer

a lot closer

tried to get a shot looking thru the scope, you can see the red dot

Hack

ArkansasHunter · 10-12-2008, 01:56 AM

All I can say is VERY VERY NICE !!! I have a mentel list of futher firearms I'd like to own and the one you have pictured is one of them !!!!!!!!!
Thanks and Congrats ! Lucky !!! ...A.H

GlockMeister · 10-12-2008, 04:01 AM

Looking good. And where did you get the scope mount you have there? Link if possible?

madcratebuilder · 10-12-2008, 08:14 AM

Nice SBH, that is one beefy looking scope mount. I've been very happy with mine. I've upgraded the cyl pin and ejector rod housing, next is a NMBH hammer so I can add a side cocker.

neophyte · 10-12-2008, 08:40 AM

blteffe: Sir; a very nice combination

thanks for sharing

Sir; we too have a ''Ruger'' Lovers form that you and the ''Blackhawk'' will go good in

bltefft · 10-12-2008, 12:14 PM

Quote:

Originally Posted by GlockMeister

Looking good. And where did you get the scope mount you have there? Link if possible?

Here's the link

MidwayUSA - Weaver Mount Scope Base Ruger Blackhawk, Super Blackhawk #301 Gloss

Hack

bltefft · 10-12-2008, 12:18 PM

Quote:

Originally Posted by neophyte

blteffe: Sir; a very nice combination

thanks for sharing

Sir; we too have a ''Ruger'' Lovers form that you and the ''Blackhawk'' will go good in

I thought I was in the Ruger Lovers forum.

Hack - bltefft, not blteffe,

SgtKnuckles · 10-12-2008, 07:36 PM

Good Looking Guns... Do you holsters for them...???

bltefft · 10-12-2008, 10:24 PM

I have a big, over the shoulder, hang on my side, holster. Can't remember where I got it, though.

hACK

madcratebuilder · 10-13-2008, 09:27 AM

Quote:

Originally Posted by SgtKnuckles

Good Looking Guns... Do you holsters for them...???

I have a Uncle Mikes chest carry with a full flap. Keeps it dry when hunting wet brush, I'm in Oregon, the brush is always wet.

papadave · 10-19-2008, 10:27 PM

I have a 6 1/2" Blackhawk chambered in .41 mag with the same setup. Works great for White tail hunting.

testhop · 10-28-2008, 12:27 AM

MADCRATE BUILDER I LIKE THOSE GRIPS

hunterdan · 11-19-2008, 04:02 PM

how did you install weaver 301 mount on rear,it fit loose on my new super blackhawk

mboree · 11-21-2008, 12:20 AM

I just installed the same base on my New Model Super Blackhawk last night. The screw that went in place of the removed rear sight screw also had a spacer(or bushing) that belongs between the new base and the top of the receiver. Fits great. Now I just have to find optics I like. Thinking of Reflex sight.

Mel Bjork · 05-22-2009, 08:29 PM

I've got a ruger Bisley Hunter blackhawk in 41 mag, 71/2" with a Leupold M8 2 power. It's my pride and joy. Easy to see through the scope but it is heavy, so when I go hog hunting I hope I have a tree to rest it on. Here it is and my Smith & Wesson model 57 41 mag

Mel
http://s547.photobucket.com/albums/h...view=slideshow

Sorry I'm new to this photo bucket thing, I didn't mean to put all these on there.

Palladin8 · 05-22-2009, 08:46 PM

now I have something else I need to buy. I have wanted to mount a scope on my 7.5" Blackhawk but didn't want to drill and tap it for the mount. I will have to try this out. That way if I don't like it I can return it to stock without having the holes.

10-12-2008, 01:52 AM	#1
bltefft Senior Member Join Date: Sep 2008 Posts: 379	Pics of My Ruger Super Blackhawk and Red Dot Scope Pics of My Ruger Super Blackhawk and Red Dot Scope Here are 4 pics of my .44 Mag Ruger Super Blackhawk and new Millett Red Dot Scope Here's a shot of the whole rig A little closer a lot closer tried to get a shot looking thru the scope, you can see the red dot Hack Last edited by bltefft; 10-12-2008 at 11:05 AM.

10-12-2008, 08:14 AM	#4
madcratebuilder Senior Member Join Date: Oct 2007 Location: Northern Orygun Posts: 2,395 Images: 3	Nice SBH, that is one beefy looking scope mount. I've been very happy with mine. I've upgraded the cyl pin and ejector rod housing, next is a NMBH hammer so I can add a side cocker. __________________ Make peace with your past so it won't screw up the present.

10-12-2008, 08:40 AM	#5
neophyte Senior Member Join Date: Aug 2007 Location: Charlotte, NC Posts: 8,827 Blog Entries: 2	combination blteffe: Sir; a very nice combination thanks for sharing Sir; we too have a ''Ruger'' Lovers form that you and the ''Blackhawk'' will go good in __________________ Craig May the Lord's face radiate with joy because of you. Numbers 6:24

11-19-2008, 04:02 PM	#13
hunterdan Registered User Join Date: Nov 2008 Posts: 1	ruger mounts how did you install weaver 301 mount on rear,it fit loose on my new super blackhawk Last edited by hunterdan; 11-19-2008 at 04:06 PM.

05-22-2009, 08:29 PM	#15
Mel Bjork Senior Member Join Date: Oct 2008 Posts: 109	I've got a ruger Bisley Hunter blackhawk in 41 mag, 71/2" with a Leupold M8 2 power. It's my pride and joy. Easy to see through the scope but it is heavy, so when I go hog hunting I hope I have a tree to rest it on. Here it is and my Smith & Wesson model 57 41 mag Mel http://s547.photobucket.com/albums/h...view=slideshow Sorry I'm new to this photo bucket thing, I didn't mean to put all these on there. Last edited by Mel Bjork; 05-22-2009 at 08:48 PM.

10-12-2008, 01:56 AM	#2
ArkansasHunter Senior Member Join Date: Mar 2007 Location: South Arkansas. Posts: 17,218	All I can say is VERY VERY NICE !!! I have a mentel list of futher firearms I'd like to own and the one you have pictured is one of them !!!!!!!!! Thanks and Congrats ! Lucky !!! ...A.H

10-12-2008, 04:01 AM	#3
GlockMeister Senior Member Join Date: Dec 2007 Location: Northern Illinois Posts: 9,676	Looking good. And where did you get the scope mount you have there? Link if possible? __________________ "The people never give up their liberties but under some delusion." "Edmond Burke"

10-12-2008, 07:36 PM	#8
SgtKnuckles Senior Member Join Date: Aug 2007 Location: Florida Posts: 450 Images: 2	Good Looking Guns... Do you holsters for them...???

10-12-2008, 10:24 PM	#9
bltefft Senior Member Join Date: Sep 2008 Posts: 379	I have a big, over the shoulder, hang on my side, holster. Can't remember where I got it, though. hACK

10-19-2008, 10:27 PM	#11
papadave Member Join Date: Aug 2005 Posts: 40	I have a 6 1/2" Blackhawk chambered in .41 mag with the same setup. Works great for White tail hunting.

10-28-2008, 12:27 AM	#12
testhop Senior Member Join Date: Jul 2008 Posts: 196	MADCRATE BUILDER I LIKE THOSE GRIPS

11-21-2008, 12:20 AM	#14
mboree Registered User Join Date: Nov 2008 Posts: 1	I just installed the same base on my New Model Super Blackhawk last night. The screw that went in place of the removed rear sight screw also had a spacer(or bushing) that belongs between the new base and the top of the receiver. Fits great. Now I just have to find optics I like. Thinking of Reflex sight.

05-22-2009, 08:46 PM	#16
Palladin8 Senior Member Join Date: Nov 2007 Location: Las Vegas, NV Posts: 2,451	now I have something else I need to buy. I have wanted to mount a scope on my 7.5" Blackhawk but didn't want to drill and tap it for the mount. I will have to try this out. That way if I don't like it I can return it to stock without having the holes.