LCP on recall

MrsS · 11-14-2008, 08:32 AM

Went to the Ruger site to look at the current price of the LCP, since I have been wanting to get one and I see on the site that it is under recall.

Wonder how long that recall has been going on? And I loved the look/size of that gun!!

www.ruger-firearms.com is where I found said recall.

dmwphoto · 11-14-2008, 09:15 AM

There is another thread on that here somewhere. I am waiting for shipping instructions but still carrying mine while I wait.

Cyrano · 11-14-2008, 09:16 AM

The recall has been going on since mid-summer at least. It applies to the first-generation LCPs. The problem has since been fixed. The current production LCPs ("second generation") are fine. I think the Ruger people pay postage/shipping both ways, but you'd have to talk to them.

The site should have a listing of the serial numbers range that are on recall. Get that and print it out, then simply check the s/n of any pistol you are considering to make sure it's not subvject to the recall.

The LCP is not my cup of tea, but the people at Gun Tests think it's a nice little gun. And one of the handgun magazines raved abotu the quality of Ruger's service in this recall matter, so I don't see how you can go wrong.

dmwphoto · 11-14-2008, 10:18 AM

here (Ruger LCP) is the other thread on this

MrsS · 11-14-2008, 10:42 AM

Thanks for the heads up....guess I should of scrolled down some, LOl...

dmwphoto · 11-14-2008, 10:48 AM

No worries MrsS! I only knew it because I have one and saw the earlier thread. Linking to it here my provide additional info for those that want it.
Dave

neophyte · 11-14-2008, 10:56 AM

a fine firearm from a fine company

)

Click Here to sign up immediately using the on-line form.
You may also sign up by using any of these alternative methods:

E-mail: LCPRecall@ruger.com
Fax: (928) 541-8873
Phone: LCP Recall Hotline
1-800-784-3701
(available Monday - Friday, 9:00 a.m. to 8:00 p.m. EDT)

Ruger has recently received a small number of reports from the field indicating that LCP pistols can discharge when dropped onto a hard surface with a round in the chamber. We are firmly committed to safety and would like to retrofit all older LCP Pistols. The retrofit involves installation of an upgraded hammer mechanism at no charge to the customer.

We want to remind gun users that, for maximum safety when carrying any pistol with a loaded magazine in place, the chamber should be empty, and the slide should be closed. Any gun may fire if dropped or struck.

How to determine if your pistol needs the retrofit: All LCP pistols bearing prefix “370” (that is, serial number 370-xxxxx) may be affected. Newly manufactured and retrofitted “370” prefix LCP pistols with the new hammer mechanism installed have been marked with a diamond in the flat portion of the slot just behind and below the hammer as shown to the right. Going forward, new pistols will be marked with the serial number prefix “371” (serial number 371-xxxxx). Pistols with the “371” prefix are not affected.

How to arrange to have your pistol retrofitted:

SwedeSteve · 11-16-2008, 07:31 PM

Should of bought a Kel-Tec !!

neophyte · 11-16-2008, 07:47 PM

SwedeSteve: Sir;

never

Ruger is king

SwedeSteve · 11-17-2008, 12:16 PM

So they had to copy the Kel-Tec to the T, and still got it wrong ??

fangus · 12-06-2008, 09:13 PM

i put in for the recall on 10/29 got my info and shipping box on 12 /4 waiting for ups to pick it up no problems with the gun at all. gandermountain has them for 349.oo

fangus · 12-10-2008, 08:14 PM

my lcp is now at ruger they ship it next day air i was told five days +shipping to get it back

dmwphoto · 12-11-2008, 05:31 PM

My Ruger LCP came back today. Gone 1 week exactly. Ruger really gets it and I applaud their customer service. They give the extra clip with finger extension as a gift and also threw in a REAL NICE Ruger LCP ball cap.
I am glad to have it back and will head oout to the range to verify before carrying again.

jim433 · 12-11-2008, 10:55 PM

dmw, did you have any of the other work done? also, I contacted ruger about a month ago, and haven't got the paperwork yet...hope it comes soon....i heard that they will file down that little part inside that cuts up the brass casings if you want..they will also make the slide lock bigger(easier to engage) and also blue the barrel...

dmwphoto · 12-12-2008, 04:25 AM

they automaticaly perform all available upgrades while they have your gun.

jim433 · 12-12-2008, 05:16 AM

was the slide lock a free upgrade?....did you have it done? do you like it?

dmwphoto · 12-12-2008, 06:31 AM

yes and yes and yes....

captsquirrel · 12-12-2008, 03:12 PM

Hey dmw, Glad to hear you have your Ruger back. Have fun and stay safe.

knightRider · 12-12-2008, 03:14 PM

Quote:

Originally Posted by SwedeSteve

So they had to copy the Kel-Tec to the T, and still got it wrong ??

finally someone that understands .... i have been shaking my head at this gun since conception ...

dmwphoto · 12-12-2008, 04:27 PM

Quote:

Originally Posted by knightRider

finally someone that understands .... i have been shaking my head at this gun since conception ...

go ahead and belittle it guys, just shows what you are made of.

11-14-2008, 08:32 AM	#1
MrsS Senior Member Join Date: Jan 2008 Location: 16th state. Posts: 2,293	LCP on recall Went to the Ruger site to look at the current price of the LCP, since I have been wanting to get one and I see on the site that it is under recall. Wonder how long that recall has been going on? And I loved the look/size of that gun!! www.ruger-firearms.com is where I found said recall. __________________ In GOD* I do trust!* "Today's Forecast: GOD reigns & his son shines!"~Author unkown

11-14-2008, 10:42 AM	#5
MrsS Senior Member Join Date: Jan 2008 Location: 16th state. Posts: 2,293	Thanks for the heads up....guess I should of scrolled down some, LOl... __________________ In GOD* I do trust!* "Today's Forecast: GOD reigns & his son shines!"~Author unkown

11-14-2008, 10:56 AM	#7
neophyte Senior Member Join Date: Aug 2007 Location: Charlotte, NC Posts: 8,823 Blog Entries: 2	Ruger LCP a fine firearm from a fine company) Click Here to sign up immediately using the on-line form. You may also sign up by using any of these alternative methods: E-mail: LCPRecall@ruger.com Fax: (928) 541-8873 Phone: LCP Recall Hotline 1-800-784-3701 (available Monday - Friday, 9:00 a.m. to 8:00 p.m. EDT) Ruger has recently received a small number of reports from the field indicating that LCP pistols can discharge when dropped onto a hard surface with a round in the chamber. We are firmly committed to safety and would like to retrofit all older LCP Pistols. The retrofit involves installation of an upgraded hammer mechanism at no charge to the customer. We want to remind gun users that, for maximum safety when carrying any pistol with a loaded magazine in place, the chamber should be empty, and the slide should be closed. Any gun may fire if dropped or struck. How to determine if your pistol needs the retrofit: All LCP pistols bearing prefix “370” (that is, serial number 370-xxxxx) may be affected. Newly manufactured and retrofitted “370” prefix LCP pistols with the new hammer mechanism installed have been marked with a diamond in the flat portion of the slot just behind and below the hammer as shown to the right. Going forward, new pistols will be marked with the serial number prefix “371” (serial number 371-xxxxx). Pistols with the “371” prefix are not affected. How to arrange to have your pistol retrofitted: __________________ Craig May the Lord's face radiate with joy because of you. Numbers 6:24

11-16-2008, 07:31 PM	#8
SwedeSteve Suspected Member Join Date: Feb 2007 Location: Anchortown, Alaska Posts: 23,549 Images: 1	Should of bought a Kel-Tec !! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

11-16-2008, 07:47 PM	#9
neophyte Senior Member Join Date: Aug 2007 Location: Charlotte, NC Posts: 8,823 Blog Entries: 2	Ruger SwedeSteve: Sir; never Ruger is king __________________ Craig May the Lord's face radiate with joy because of you. Numbers 6:24

11-14-2008, 09:15 AM	#2
dmwphoto Senior Member Join Date: Aug 2008 Location: Richmond, Va Posts: 551	There is another thread on that here somewhere. I am waiting for shipping instructions but still carrying mine while I wait.

11-14-2008, 09:16 AM	#3
Cyrano Senior Member Join Date: Oct 2007 Location: New York Posts: 6,919	The recall has been going on since mid-summer at least. It applies to the first-generation LCPs. The problem has since been fixed. The current production LCPs ("second generation") are fine. I think the Ruger people pay postage/shipping both ways, but you'd have to talk to them. The site should have a listing of the serial numbers range that are on recall. Get that and print it out, then simply check the s/n of any pistol you are considering to make sure it's not subvject to the recall. The LCP is not my cup of tea, but the people at Gun Tests think it's a nice little gun. And one of the handgun magazines raved abotu the quality of Ruger's service in this recall matter, so I don't see how you can go wrong.

11-14-2008, 10:18 AM	#4
dmwphoto Senior Member Join Date: Aug 2008 Location: Richmond, Va Posts: 551	here (Ruger LCP) is the other thread on this

11-14-2008, 10:48 AM	#6
dmwphoto Senior Member Join Date: Aug 2008 Location: Richmond, Va Posts: 551	No worries MrsS! I only knew it because I have one and saw the earlier thread. Linking to it here my provide additional info for those that want it. Dave

11-17-2008, 12:16 PM	#10
SwedeSteve Suspected Member Join Date: Feb 2007 Location: Anchortown, Alaska Posts: 23,549 Images: 1	So they had to copy the Kel-Tec to the T, and still got it wrong ?? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

12-06-2008, 09:13 PM	#11
fangus Member Join Date: Aug 2008 Location: jackson michigan Posts: 14	i put in for the recall on 10/29 got my info and shipping box on 12 /4 waiting for ups to pick it up no problems with the gun at all. gandermountain has them for 349.oo Last edited by fangus; 12-06-2008 at 09:16 PM.

12-10-2008, 08:14 PM	#12
fangus Member Join Date: Aug 2008 Location: jackson michigan Posts: 14	my lcp is now at ruger they ship it next day air i was told five days +shipping to get it back

12-11-2008, 05:31 PM	#13
dmwphoto Senior Member Join Date: Aug 2008 Location: Richmond, Va Posts: 551	My Ruger LCP came back today. Gone 1 week exactly. Ruger really gets it and I applaud their customer service. They give the extra clip with finger extension as a gift and also threw in a REAL NICE Ruger LCP ball cap. I am glad to have it back and will head oout to the range to verify before carrying again.

12-11-2008, 10:55 PM	#14
jim433 Senior Member Join Date: Mar 2008 Posts: 127	dmw, did you have any of the other work done? also, I contacted ruger about a month ago, and haven't got the paperwork yet...hope it comes soon....i heard that they will file down that little part inside that cuts up the brass casings if you want..they will also make the slide lock bigger(easier to engage) and also blue the barrel...

12-12-2008, 04:25 AM	#15
dmwphoto Senior Member Join Date: Aug 2008 Location: Richmond, Va Posts: 551	they automaticaly perform all available upgrades while they have your gun.

12-12-2008, 05:16 AM	#16
jim433 Senior Member Join Date: Mar 2008 Posts: 127	was the slide lock a free upgrade?....did you have it done? do you like it?

12-12-2008, 06:31 AM	#17
dmwphoto Senior Member Join Date: Aug 2008 Location: Richmond, Va Posts: 551	yes and yes and yes....

12-12-2008, 03:12 PM	#18
captsquirrel Senior Member Join Date: Jul 2008 Location: Las Vegas, NV. Posts: 1,569	Hey dmw, Glad to hear you have your Ruger back. Have fun and stay safe. __________________ "I have learned to use the word 'impossible' with the greatest caution." Werner Von Braun