t3 miss fire

aussie boy · 04-27-2008, 06:22 AM

while hunting last weekend, my tikka t3 30'06 fired without warning. i opened the bolt and the gun went off, the bolt blew back and the case ejected in the one motion. there was nothing in the vecinity of the trigger. has anybody had a similar problem or heard of any such drama with a tikka T3

.22hustler · 04-27-2008, 06:25 AM

Take it to a gunsmith, NOW. I wouldn't want to be around that gun for any reason. If it can't be fixed, destroy it.

aussie boy · 04-27-2008, 06:31 AM

I HUNT WITH ABOUT TEN PEOPLE EVERY WEEK, SO IF THERE ARE ONLY NINE NEXT WEEK IT WONT MATTER. HHAAHAHA

I WILL THIS WEEK, BUT JUST WONDERING IF IT HAS HAPPENED TO ANYONE ELSE.

SwedeSteve · 04-30-2008, 01:18 AM

What brand of ammo were you shooting, and is it a new or used rifle?

aussie boy · 04-30-2008, 04:12 AM

the gun is about 100 shots old. the ammo was a hand load, although that didn't cause the problem because the pin struck it pritty hard. I have spoken to the gun smith and he believes that there was a stick stuck in the action. the stick jamed the hammer back and when the bolt was opened the stick got crushed and the firing pin slamed forward.

SwedeSteve · 04-30-2008, 12:44 PM

Well, I hope that turns out to be the case.

sell33 · 04-30-2008, 12:47 PM

That is very scary, i had a slamfire with my gf's dads savage a couple weeks ago and it scared the living sh*t out of me....the gun is ok though the firing pin was just stuck somehow. Not sure about your t3 but i would definitely have it check out by a professional.

04-27-2008, 06:22 AM	#1
aussie boy Registered User Join Date: Mar 2008 Posts: 5	t3 miss fire while hunting last weekend, my tikka t3 30'06 fired without warning. i opened the bolt and the gun went off, the bolt blew back and the case ejected in the one motion. there was nothing in the vecinity of the trigger. has anybody had a similar problem or heard of any such drama with a tikka T3

04-30-2008, 01:18 AM	#4
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,904	What brand of ammo were you shooting, and is it a new or used rifle? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

04-30-2008, 12:44 PM	#6
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,904	Well, I hope that turns out to be the case. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-27-2008, 06:25 AM	#2
.22hustler Senior Member Join Date: Nov 2007 Location: New York Posts: 579	Take it to a gunsmith, NOW. I wouldn't want to be around that gun for any reason. If it can't be fixed, destroy it.

04-27-2008, 06:31 AM	#3
aussie boy Registered User Join Date: Mar 2008 Posts: 5	I HUNT WITH ABOUT TEN PEOPLE EVERY WEEK, SO IF THERE ARE ONLY NINE NEXT WEEK IT WONT MATTER. HHAAHAHA I WILL THIS WEEK, BUT JUST WONDERING IF IT HAS HAPPENED TO ANYONE ELSE.

04-30-2008, 04:12 AM	#5
aussie boy Registered User Join Date: Mar 2008 Posts: 5	the gun is about 100 shots old. the ammo was a hand load, although that didn't cause the problem because the pin struck it pritty hard. I have spoken to the gun smith and he believes that there was a stick stuck in the action. the stick jamed the hammer back and when the bolt was opened the stick got crushed and the firing pin slamed forward.

04-30-2008, 12:47 PM	#7
sell33 Senior Member Join Date: Feb 2008 Location: Ohio Posts: 840	That is very scary, i had a slamfire with my gf's dads savage a couple weeks ago and it scared the living sh*t out of me....the gun is ok though the firing pin was just stuck somehow. Not sure about your t3 but i would definitely have it check out by a professional.