tikka mag and ring q's

Skibum · 05-28-2008, 10:19 PM

I am doing some preliminary searching for a rifle for my soon to be 18 year old son, who is definitely full sized. The t3 is one of the rifles that caught my eye, along with various Savages and Howas. Two things struck me about the Tikka: the magazines seem to be very expensive, at least $52 each, and the rings that may or may not be included (apparently medium height) apparently don't work with Simmons AETEC scopes, which are apparently to big around, according to one post in another forum.

My mag question is: is there another, less expensive source of mags?

My ring question is: What ring and scope combinations have worked well, and what scopes work well with supplied rings?

SwedeSteve · 05-29-2008, 12:10 PM

What is the objective diameter of your scope?

For mags try: http://www.thecountryshed.com/sako_tikka_mags.htm

Skibum · 05-29-2008, 01:43 PM

Quote:

Originally Posted by SwedeSteve

What is the objective diameter of your scope?

For mags try: http://www.thecountryshed.com/sako_tikka_mags.htm

The mags at that source appear to be $69 each, kind of pricy for a $500 rifle. I don't have a scope yet, but was thinkinga bout the AETEC, as it is a good value. Even if I were not to go with the AETEC, I was concerned taht the medium rings might be kind of low, and wanted more info. Were I to buy the rifle, I would not want to buy a scope for which I would need to buy a different set of rings, because it would make more sense to get a more expensive scope which fits.

Skibum · 05-30-2008, 05:40 PM

I am not sure why my second post tomthis thread didn't show up, but I will attemtp to restate it. I don't have the rifle yet. I jsut don't want to get into a situation where I have to spend a lot of money simply trying to fit a scope to a rifle. The tikka seems to come with rings, so I would want to avoid buying a scope that needed other rings, if it were reasonable. A good set of rings and base could easily exceed $50, which is a big chunk of change compared to the scope costs we're discussing here. It would make more sense to buy a $200 scope which fit the rings and delivered $50 more value than to try to get a $150 scope to fit the hard way.

As far as the magazines are concerned, the source you cited charges almost $70 for a magazine, which seems kind of pricy on a $500 rifle.

SwedeSteve · 08-09-2008, 02:26 PM

The medium rings will fit for a scope of 3x9x40 dimensions. I do not know of the specific scope you are talking about and what its Objective diameter is. If you can find that out you can do a little math and determine if the scope will clear. Also it would depend if the tikka has iron sights as well. You can read up on it here: http://www.thecountryshed.com/sako_t...ope_mounts.htm

vartex · 08-20-2008, 12:32 PM

If the Tikka rings don't work for your scope you can use any manufacture's rings and base(s), I think even Weaver offers a Weaver style rig set for he Sako dovetail. I can't offer an alternative for the expensive magazines but the rifles are good enough to make the high cost worthwhile.

SwedeSteve · 08-20-2008, 01:43 PM

Definitely true there !!

Woodbeef · 10-05-2008, 01:09 PM

Hmmm never seen a new T3 come with rings like the Rugers do. The Tikkas are D&T'd for Weaver bases also.

05-28-2008, 10:19 PM	#1
Skibum Member Join Date: May 2008 Posts: 17	tikka mag and ring q's I am doing some preliminary searching for a rifle for my soon to be 18 year old son, who is definitely full sized. The t3 is one of the rifles that caught my eye, along with various Savages and Howas. Two things struck me about the Tikka: the magazines seem to be very expensive, at least $52 each, and the rings that may or may not be included (apparently medium height) apparently don't work with Simmons AETEC scopes, which are apparently to big around, according to one post in another forum. My mag question is: is there another, less expensive source of mags? My ring question is: What ring and scope combinations have worked well, and what scopes work well with supplied rings?

05-29-2008, 12:10 PM	#2
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 10,372 Images: 1	What is the objective diameter of your scope? For mags try: http://www.thecountryshed.com/sako_tikka_mags.htm __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

08-09-2008, 02:26 PM	#5
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 10,372 Images: 1	The medium rings will fit for a scope of 3x9x40 dimensions. I do not know of the specific scope you are talking about and what its Objective diameter is. If you can find that out you can do a little math and determine if the scope will clear. Also it would depend if the tikka has iron sights as well. You can read up on it here: http://www.thecountryshed.com/sako_t...ope_mounts.htm __________________ Thank God we don't get as much Government as we pay for! -Will Rogers Last edited by SwedeSteve; 08-09-2008 at 02:32 PM.

08-20-2008, 01:43 PM	#7
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 10,372 Images: 1	Definitely true there !! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-30-2008, 05:40 PM	#4
Skibum Member Join Date: May 2008 Posts: 17	I am not sure why my second post tomthis thread didn't show up, but I will attemtp to restate it. I don't have the rifle yet. I jsut don't want to get into a situation where I have to spend a lot of money simply trying to fit a scope to a rifle. The tikka seems to come with rings, so I would want to avoid buying a scope that needed other rings, if it were reasonable. A good set of rings and base could easily exceed $50, which is a big chunk of change compared to the scope costs we're discussing here. It would make more sense to buy a $200 scope which fit the rings and delivered $50 more value than to try to get a $150 scope to fit the hard way. As far as the magazines are concerned, the source you cited charges almost $70 for a magazine, which seems kind of pricy on a $500 rifle.

08-20-2008, 12:32 PM	#6
vartex Registered User Join Date: Aug 2008 Posts: 2	If the Tikka rings don't work for your scope you can use any manufacture's rings and base(s), I think even Weaver offers a Weaver style rig set for he Sako dovetail. I can't offer an alternative for the expensive magazines but the rifles are good enough to make the high cost worthwhile.

10-05-2008, 01:09 PM	#8
Woodbeef Registered User Join Date: Oct 2008 Posts: 9	Hmmm never seen a new T3 come with rings like the Rugers do. The Tikkas are D&T'd for Weaver bases also.