Savage riot shotgun

mdj696 · 01-15-2008, 09:22 PM

Bought a Savage 12 ga riot shotgun, model 69RH in 1988. Came from Greenville S.C. PD. No telling how long it was probably left in cocked position in trunk of a patrol car. Can't find model # in Numrich Gun Parts catalog. Would like to replace spring. Is Savage or Stevens still in business?

samuel · 01-15-2008, 09:58 PM

Have you tried to fire it?The spring should be fine but since I havnt tryed to find the model I dont know if it is auto or pump.Mooseman will tell you what you have and what to look for but if it is auto,new o rings may be a good investment.I would clean it and shoot it before going further.Savage is going stronger than ever.Put Savage arms on your search bar. sam.

Mooseman684 · 01-15-2008, 10:56 PM

There is a Stevens Model 69-RXL 12 ga. Law Enforcement version of the model 67...18-1/4" barrel, Discontinued in 1989.
So Model 67 parts should fit...
Rich

mdj696 · 01-15-2008, 11:55 PM

Its a pump and yes I've fired it, even came in 2nd place one time at a turkey shoot. It got a good laugh bringing a riot gun to turkey shoot, coming in 2nd wiped some smiles off some faces. Its just that thud sound when it hits firing pin that I'm not confortable with. I wouldn't want to carry it like walking point.

Looked in My Numrich Gun Parts, in the middle of Savage, Stevens setion, looking for model #s I found a Springfield model 67, series C, D, and E, would that be the same .

samuel · 01-16-2008, 05:09 AM

Numrich has a toll free # you can call and they should be able to clear it up. sam.

mdj696 · 01-16-2008, 11:22 AM

10-4, will call

mym1a · 01-16-2008, 12:59 PM

other then the price, age and exterior hammer is there realy a difference between the 2?

mdj696 · 01-16-2008, 06:44 PM

Hammer is interior, just sounds weak.

Mooseman684 · 01-16-2008, 11:32 PM

That uses a Coil Spring and plunger to fire...A gunsmith should have spring stock in inventory that he can cut one for you if you cant find one...
Rich

stitchclimber · 01-16-2008, 11:55 PM

my model 67 has that same thud when the hammer falls.

squadleader · 10-17-2009, 11:41 PM

I have a Savage 69 RXL 12 Ga 3" Mag three questions can slugs be used in it and if not where to locate a 67 slug barrel? It is still a great Shotgun. Is there any one that sells or is there any tactical conversions for it?

01-15-2008, 09:22 PM	#1
mdj696 Senior Member Join Date: Jan 2007 Posts: 534 Images: 1	Savage riot shotgun Bought a Savage 12 ga riot shotgun, model 69RH in 1988. Came from Greenville S.C. PD. No telling how long it was probably left in cocked position in trunk of a patrol car. Can't find model # in Numrich Gun Parts catalog. Would like to replace spring. Is Savage or Stevens still in business?

01-15-2008, 10:56 PM	#3
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness. Unit 13 Posts: 11,305 Images: 2	There is a Stevens Model 69-RXL 12 ga. Law Enforcement version of the model 67...18-1/4" barrel, Discontinued in 1989. So Model 67 parts should fit... Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

01-15-2008, 11:55 PM	#4
mdj696 Senior Member Join Date: Jan 2007 Posts: 534 Images: 1	Its a pump and yes I've fired it, even came in 2nd place one time at a turkey shoot. It got a good laugh bringing a riot gun to turkey shoot, coming in 2nd wiped some smiles off some faces. Its just that thud sound when it hits firing pin that I'm not confortable with. I wouldn't want to carry it like walking point. Looked in My Numrich Gun Parts, in the middle of Savage, Stevens setion, looking for model #s I found a Springfield model 67, series C, D, and E, would that be the same . Last edited by mdj696; 01-16-2008 at 12:06 AM. Reason: Automerged Doublepost

01-16-2008, 12:59 PM	#7
mym1a Senior Member Join Date: Jan 2008 Posts: 1,308	trench gun/shot gun ? other then the price, age and exterior hammer is there realy a difference between the 2?

01-16-2008, 11:32 PM	#9
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness. Unit 13 Posts: 11,305 Images: 2	That uses a Coil Spring and plunger to fire...A gunsmith should have spring stock in inventory that he can cut one for you if you cant find one... Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

01-15-2008, 09:58 PM	#2
samuel Senior Member Join Date: Dec 2006 Posts: 10,905	Have you tried to fire it?The spring should be fine but since I havnt tryed to find the model I dont know if it is auto or pump.Mooseman will tell you what you have and what to look for but if it is auto,new o rings may be a good investment.I would clean it and shoot it before going further.Savage is going stronger than ever.Put Savage arms on your search bar. sam.

01-16-2008, 05:09 AM	#5
samuel Senior Member Join Date: Dec 2006 Posts: 10,905	Numrich has a toll free # you can call and they should be able to clear it up. sam.

01-16-2008, 11:22 AM	#6
mdj696 Senior Member Join Date: Jan 2007 Posts: 534 Images: 1	10-4, will call

01-16-2008, 06:44 PM	#8
mdj696 Senior Member Join Date: Jan 2007 Posts: 534 Images: 1	Hammer is interior, just sounds weak.

01-16-2008, 11:55 PM	#10
stitchclimber Senior Member Join Date: Aug 2007 Location: The great northwest Posts: 1,130	my model 67 has that same thud when the hammer falls. __________________ turning up the radio, got just enough religion and a half tank of gas...

10-17-2009, 11:41 PM	#11
squadleader Registered User Join Date: Oct 2009 Posts: 1	69 rxl I have a Savage 69 RXL 12 Ga 3" Mag three questions can slugs be used in it and if not where to locate a 67 slug barrel? It is still a great Shotgun. Is there any one that sells or is there any tactical conversions for it?