| | #21 | |
| Member Join Date: Dec 2008
Posts: 21
| Quote:
I've fired a GM solenoid when it's not mounted and I'm fairly confident it would set off a primer if fitted with a firing pin (or in replace of the hammer). as to why someone would want to do this? WHY NOT!?!?! | |
| | |
| | #22 | |
| Senior Member Join Date: Dec 2008 Location: deep in the swamps SC
Posts: 1,204
| Quote:
sure, but you don't need something that big to accomplish the task. even the small solenoids used as throttle kickers on the later carburated cars (used to bump up the throttle when the A/C engaged) would work. even the little ones used in all auto transmissions anymore would work (depending on its particular design). what matters is the length of the plunger motion and the actual weight of the plunger core. sharpen the core plunger to a point and you have a electronically driven firing pin. depending on how you use it could depend on if ATF will want to spank you for it, because the duty cycle rate could be tuned to make a semi a full auto.
__________________ If I need more than 1 shot, I need more practice. | |
| | |
| | #23 | |
| Member Join Date: Dec 2008
Posts: 21
| Quote:
sounds fun, but i'l stick with things that don't attract federal employees. | |
| | |
| | #24 |
| Senior Member Join Date: Mar 2006
Posts: 3,611
|
You could turn a DC motor attached to a crank, rod, piston [firing pin] like a car engine, inline pistons and provide multi barrels for it. Or do it with an array of solenoids. I'm sure the Military has a rapid fire shotgun.
|
| | |
| | #25 |
| Senior Member ![]() Join Date: Dec 2006
Posts: 10,916
|
I'll bet that setup where you could hunt by remote control,a solinoid sets those guns off.As to power,it takes a few lbs or less to pull a trigger and the average hammer spring has 10 to 25lbs force.The electro-magnet developes into the hundreds of lbs and the return spring varies greatly but some seem as strong as hammer springs. ,,,sam.
|
| | |
| | #26 |
| Senior Member ![]() Join Date: Dec 2007 Location: Minn.
Posts: 2,310
|
I heard of a guy that had some 22 shells in his pocket and he put a battery in it and some went off.
|
| | |
| | #27 |
| Senior Member Join Date: Apr 2008 Location: Stuck in Los Angeles (sic)
Posts: 169
|
A whole lot of speculation going on here. Yes a solenoid can fire a primer. Starter solenoids are just one type of hundreds of types of solenoids. Did you know that your electronic fuel injectors are solenoids? I'm sure there are solenoids small enough with enough power to set off a primer. Why couldn't the orig poster be thinking of an electrically fired sholder weapon? A small battery operated solenoid in the receiver assy. isn't that odd of an idea! Put a point on the armature of a linear solenoid and use that for the firing pin. Or make the entire bolt assy a solenoid, EASY! I don't see why this would be illegal, just another way to fire a gun, and I don't think there are any restrictions on that (like bbl lengths. stocks, number of round fired per trigger activation, caliber, etc.)
__________________ Casings hold sausage, Cases hold gunpowder and bullets Last edited by mikld; 10-20-2009 at 11:59 AM. |
| | |
| | #28 |
| Member Join Date: Sep 2009
Posts: 21
|
u would need to strike the primer
|
| | |
| | #29 |
| Senior Member Join Date: Nov 2008
Posts: 261
|
sounds like somebody is trying to protect his weed crop
__________________ i didnt do it i promise...ok maby i did...mike |
| | |