Really nice. 🤗
Bernardelli VP .25 1957
Bernardelli VP .25 1957, does anyone information on this firearm? I have another project I am working on now, I found some used parts, and some new parts.
Found this in one of of my old gunsmith books from the1940's.
![White Line Font Gun barrel Engineering]()
![Font Publication Newspaper Newsprint Paper]()
Found this on the internet.
![Trigger Air gun Font Gun barrel Newspaper]()
![Rectangle Gun barrel Gun accessory Font Metal]()
Found this on the internet.
![Trigger Air gun Line Gun barrel Gun accessory]()
Found this in one of of my old gunsmith books from the1940's.
Found this on the internet.
Found this on the internet.
1 - 5 of 10 Posts
Finally getting some progress on this firearm! 🤗
![Brown Wood Rectangle Everyday carry Font]()
The safety, spring, I have, however the "old" grips are screwed up and I found another "old" set that is in good condition.
![Wood Revolver Everyday carry Trigger Gun barrel]()
I have everything accounted for in parts except for the firing pin spring, WOLFF has them so I ordered it.
![Air gun Trigger Wood Revolver Gun barrel]()
I have tested, checked each part for fit and finish.
![Wood Trigger Air gun Gun barrel Rectangle]()
This one is much easier to work on, and it's considered a collector.
The safety, spring, I have, however the "old" grips are screwed up and I found another "old" set that is in good condition.
I have everything accounted for in parts except for the firing pin spring, WOLFF has them so I ordered it.
I have tested, checked each part for fit and finish.
This one is much easier to work on, and it's considered a collector.
Had to get some help from my "Pistol Book"
![Trigger Air gun Wood Gun barrel Gun accessory]()
The new grip screws came in. I figured it out, if the slide is off the trigger will not work, the sear is up to far with the slide off, once the slide is on the trigger pulls back 100%.
![Hand Output device Gesture Finger Audio equipment]()
The slide release will not come out once the sear is in place, took me awhile, since I was visually checking each part for fit and that is what I found out.
![Sleeve Grey Tints and shades Elbow Pattern]()
Had to get the sear orientation figured out.
![Air gun Trigger Revolver Gun barrel Gun accessory]()
The firing pin assembly and indicator. The take down lever has a hole where the indicator sticks out.
![Air gun Trigger Gun barrel Gun accessory Tints and shades]()
I have this assembly completed, the slide is one tight fitting mother puss bucket. No slop, just a smooth slide. Some slides are loose, not this one its machined really nicely.
![Gesture Font Writing instrument accessory Eyelash Wrist]()
Still more work to do, it is coming along nicely.
The new grip screws came in. I figured it out, if the slide is off the trigger will not work, the sear is up to far with the slide off, once the slide is on the trigger pulls back 100%.
The slide release will not come out once the sear is in place, took me awhile, since I was visually checking each part for fit and that is what I found out.
Had to get the sear orientation figured out.
The firing pin assembly and indicator. The take down lever has a hole where the indicator sticks out.
I have this assembly completed, the slide is one tight fitting mother puss bucket. No slop, just a smooth slide. Some slides are loose, not this one its machined really nicely.
Still more work to do, it is coming along nicely.
So, everything is finally complete and this is awesome! Everything is correct, working excellent. Found a set of grips made by the factory, the springs are Wolff, overall it is a amazing shooter.
Bernardelli VP pistol .25 from 1957. I was able to restore this pistol to safely fire again, having no issues with it.
![Air gun Trigger Wood Gun barrel Gun accessory]()
![Trigger Wood Air gun Gun barrel Gun accessory]()
Feeds the rounds without any issues.
Bernardelli VP pistol .25 from 1957. I was able to restore this pistol to safely fire again, having no issues with it.
Feeds the rounds without any issues.
1 - 5 of 10 Posts
