Billy and the reciprocating dingle arm

Discussion in 'The Powder Keg' started by Huey Rider, Sep 8, 2010.

  1. Huey Rider

    Huey Rider G&G Evangelist Forum Contributor

    I think I found a video of Billy presenting an inovation he conjured up in his lab while rebuilding his Willys.
    Last edited: Sep 8, 2010
  2. billy

    billy G&G Evangelist Forum Contributor

    Work has been proceeding in order to bring perfection to the crudely conceived idea of a machine that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of automatically synchronizing cardinal grammeters. Such a machine is the 'Turbo-Encabulator'.
    The original machine had a base-plate of prefabulated amulite, surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the pentametric fan. ... The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots in the stator, every seventh conductor being connected by a nonreversible trem'e pipe to the differential girdlespring on the 'up' end of the grammeters.
    Forty-one manestically spaced grouting brushes were arranged to feed into the rotor slipstream a mixture of high S-value phenylhydrobenzamine and 5% reminative tetryliodohexamine. Both of these liquids have specific pericosities given by P = 2.5C.n^6-7 where n is the diathetical evolute of retrograde temperature phase disposition and C is Cholmondeley's annular grillage coefficient. Initially, n was measured with the aid of a metapolar refractive pilfrometer ... but up to the present date nothing has been found to equal the transcendental hopper dadoscope. ... Undoubtedly, the turbo-encabulator has now reached a very high level of technical development. It has been successfully used for operating nofer trunnions. In addition, whenever a barescent skor motion is required, it may be employed in conjunction with a drawn reciprocating dingle arm to reduce sinusoidal depleneration.

  3. Huey Rider

    Huey Rider G&G Evangelist Forum Contributor

    link isn't working. Going to try later.
  4. PAPA G

    PAPA G G&G Evangelist Forum Contributor

    try adjusting the bias potent in cunjuction with the horizonal divotometer, that should react with the combobulatior syntosslup creating a gastromic delay that will allow the lnktrainer to flidget the flaggerater to dump....don't forget to wipe.

    in the mean time use crayons to create images for all to see:yup: