Gun and Game Forum banner
1 - 1 of 1 Posts

·
Resident Sasquatch
Joined
·
9,496 Posts
Another option is to glass bed the grips to the frame cutouts. Use good automotive paste wax or Acra-Glas release agent on the frame. Position one grip and clamp it to the frame in a spot that will allow access to the back of the grip. Mix up some regular Acra-Glas and and apply it all around the edges of the grip frame allowing it to flow into the gaps between frame and grip. Be sure to degrease the grips and use a Scotch-Brite pad to rough up the contact surfaces.
 
1 - 1 of 1 Posts
Top