close

Privacy guaranteed - Your email is not shared with anyone.

Custom kydex holsters

Discussion in 'Holsters/Slings' started by longshooter234, Mar 23, 2017.

  1. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    I've been making kydex holsters for about a year now, so I thought I would start kind of a feeler type thread here for some ideas and negotiation and what this is pretty much what I have for prices so far
    MIC=$15
    top fold with clip= $30
    2 piece with 2 clips $45
    add sweat guard= $5
    stand alone magazine holster =$15
    add on mag holster=$10
    add a paddle= $15
    add suede wrap= $5

    All of my stuff is gonna be standard black .080 kydex (other colors and thickness can be ordered but that will be added to the base price) suede is also black unless buyer wants to pay for another order.
    depending on the size and shape there will be 1 or 2 retention screws that are adjustable, and depending on iwb or owb there will be 2 or 3 loop/clip screws which may also double as retention screws if space allows/is needed

    flat rate boxes at usps will be used for most of the shipping unless otherwise discussed, and they start at about $7 and I think I could get 2 holsters and the next size up is about $9 and it should hold maybe 4 holsters (this is what I had to use to ship 1 of the 2 piece holster with additional mag holder but there was enough room in the box to fit another of the smaller designs) shipping will be on the buyer and added to the total cost but I will obviously combine as much as possible to keep your cost down.

    I have access to a decent amount of guns through friends and family and facebook so if you will p.m. me or comment on here with a gun I can see if I can get a hold of one to make a holster for you.

    [​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    these paddle holster will work with no belt so would be a good owb option for those of you that don't wear a belt often or maybe don't always wear pants with belt loops.

    a little how to adjust some stuff on the holsters
     
  2. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    20170206_195221_HDR.jpg The pics in the OP are pretty much in chronological order and i think ive gotten quite a bit better as i have built more and i may get better with each build. Here are a few more pics
    [​IMG][​IMG]

    [​IMG][​IMG]

    [​IMG]
     

  3. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Just finish one up for a ruger p89
    20170330_193118.jpg 20170330_192909.jpg
     
    Jaison and MoDoc like this.
  4. MoDoc

    MoDoc G&G Evangelist

    Good looking work, Longshooter!
     
    Jaison and longshooter234 like this.
  5. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Thanks some of my first stuff was a lil rough around the edges and its still not quite a science but i feel like im doing alright. Learn something nearly every holster i make too so one day maybe ill be perfect 100% haha
     
    Jaison likes this.
  6. MoDoc

    MoDoc G&G Evangelist

    The one for the Ruger P89 is pretty slick, as I know of no other snug-fit hip holsters for that one. Also like the car console rig you made. That one interests me.
     
    Jaison and longshooter234 like this.
  7. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Thanks the p89 is my bosses. He and his family just started leasing some land and he wanted it for some early season scoutin. The car holster was for a guy in north carolina i think, he actually got 2 of those (one for his car and one for his truck) and a standard iwb... That was a pretty good day for me haha
     
    MoDoc likes this.
  8. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    The shield with mag holster guy called me and said it was just a little big (go figure an almost pocket gun in a huge holster but thats what he asked for) he asked for a smaller one he could put on and take off without taking hia belt off, so i slapped an iwb clip on it and called it a night 20170411_205955.jpg 20170411_205559.jpg
     
  9. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Gonna change my iwb clip style up a bit and see how it goes. This was the trial run for making these and they came out pretty decent, a few more tweeks and it should be close to perfect
     
  10. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Gonna have a g19 with inforce tac light this afternoon, one day only if anybody needs a holster
     
  11. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Suede wrapped this one, it really mutes the definition but its kinda cool all matte black, and retention is still stellar 20170508_191757.jpg 20170508_191947.jpg 20170508_192155.jpg 20170508_192008.jpg
     

    Attached Files:

    Jaison likes this.
  12. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Gonna pic up a shield this weekend to build a holster or two (would be happy to make that 4 or 5 if anyone needs one)
     
  13. Jaison

    Jaison Here comes the boom! Forum Contributor

    Do you also make mag holders? Maybe for a Mec Gar CZ 75b? If so, I can shoot you a pm with pics and dimensions.

    Looking for a single mag OWB with a snap.
     
  14. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    Ill ask around on facebook to see if anyone local has one i can get my hands on, but i cant make any promises most of my friends are lame haha, that is unless u are gonna be thru north alabama anytime soon
     
    Jaison likes this.
  15. Jaison

    Jaison Here comes the boom! Forum Contributor

    I'll get some info back to you asap. Thanks for even thinking about it.
     
    longshooter234 likes this.
  16. animalspooker

    animalspooker G&G Evangelist

    2,545
    4,336
    SEMO
    Better get your money first longshooter. That guy is a little shady...lol.

    That is a sweet looking p89. My first handgun.

    What is the story on your car holster? How do you attach it to the vehicle?
     
    longshooter234 and Jaison like this.
  17. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    I just made the back piece a little larger than the front piece and it's screwed or bolted into the plastic trim.
     
  18. longshooter234

    longshooter234 G&G Evangelist

    532
    101
    Alabama
    First clip i made with my jig and first real adjustable cant i have done, just take the top screw on the clip out and move it from about 0 to about unusuable or anywhere in between... Oh its a left if u couldnt tell 20170520_201358.jpg 20170520_201446.jpg 20170520_201624.jpg