Gun and Game Forum banner
1 - 1 of 1 Posts

· Registered
9 Posts
you basically have a piece of walnut, and while refinishing you would handle like a piece of furniture.

you can go to your local hardware store and pick-up everything you need, you will need----- stripper, fine sandpaper, wood fill, and I use TUNG-OIL for that fine water proof finish.
If any large chuncks are missing from the profile of the stock you will have to splice them in and recontour.
good luck and enjoy

opening soon
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.