close

Privacy guaranteed - Your email is not shared with anyone.

Help on parts I D

Discussion in 'The Powder Keg' started by jimr, Apr 8, 2002.

  1. jimr

    jimr G&G Newbie

    14
    0
    ohio
    Hammer marked ES on left side , S on right side , Handle marked AH on left side , barrel 24 in. long , 556 on top in front of sight , dia. is .975 under handguard .750 under front sight , .726 from sight to muzzle break. where break is attached the barrel is .440 dia for about 3/4 in. break is attached with 4 set screws , not threaded, the break looks the same dia. as the .726 part of barrel. the break has 4 sets of 4 holes. the reciever has no markings . handguard is 12 1/2 in. long 2.2 in. dia. and has circle ribs about 12 or so in the length. lower reciever is a Bushmaster XM-15-E2S ser. no. L0693XX. thanks in advance
     
  2. Eric

    Eric G&G Newbie

    673
    0
    USA
    sounds like you got a kit gun built on a Bushy lower. It really sounds like you got 'milled' M16 parts instead of new ar parts. but as long as it shoots great, so what. I know that didn't help any. Eric