Gun and Game Forum banner

lock for shotgun

1281 Views 3 Replies 3 Participants Last post by  Logansdad
What is the best way to lock a Winchester Model 1200 for transport? It is hard to find a cable that will fit through the receiver and loading port.
1 - 4 of 4 Posts
:assult: :assult: :assult: :assult: :assult:

Any cable lock can be fitted trough the loading port and the ejection port.
My moss came with one and it's longer than it need to be.

:assult: :assult: :assult: :assult: :assult:
Remove the barrel and put a regular padlock through the bolt hole and out the barrel mt hole at the frt of the reciever. This works best if you use a hard case for transport, but can be done in a soft case with some extra padding(wrap the barrel in a towel).
G
Bicycle cable locks are good too...
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top