S&W 40F

Discussion in 'The Powder Keg' started by ttus, May 26, 2008.

  1. How does one remove the firing pin and spring?

    I can't get the piece on the back of the slid to slid out, so the pieces

    will be released.

    What is the trick to it?

    Thanks
     
  2. TexasT

    TexasT Devil's Advocate >:) Forum Contributor Forum Contributor

    Are you dismantling?
     

  3. Yes, Trying to get the slide apart to change the firing pin and spring.

    Thanks
     
  4. TexasT

    TexasT Devil's Advocate >:) Forum Contributor Forum Contributor

    Pull the slide back and hold it back with your hands. Right next to the stop slide is a take down catch. You pull that down and push the slide off. Or sometimes you can let the slide go back to neutral and pull the trigger. The slide should come off.
     
  5. Slid is already off the frame......... now how do you get the piece Off I spoke

    of in the First post I started this thread with.

    Thanks
     
    Last edited: May 27, 2008