Gun and Game Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
92 Posts
Measure the front screw hole of the trigger guard to the screw hole of the action, see if it's 4 1/4 or 4 1/2 inchs, then see if the stock you want to buy is the same. If you have a longe action ( 5 inch H TO H ) and the stock is 5" no problem. But many stock manufactors have changed to 4 1/4 for short actions which are what SAVAGE is making now,
 

· Registered
Joined
·
92 Posts
RUM and WSSM use a 1 1/8 receiver the norm is 1 1/16 so swapping bbls from a 3006 to 300RUM not going to happen, however the stocks will interchange (unless they did something new since 2003) If you change bbl's from 3006/270 7mm mag ect, the receivers are the same 1 1/16 did this help you??
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top